Technical Drawings

Product code: 090.134

Chromed wing mounted racing type with two bolt fixing. Flat glass 100mm diameter. 50mm hole spacing

Product code: 080.936

Black hard rubber cased 12 volt classic car battery type 279. Rating 73 amp/hour (at 20 hour rate). Length 490 mm (19.3 in) width 108 mm (4.2 in) height 222 mm (8.7 in). For the UK this battery is supplied to your door in dry condition with the acid in a container ready for you to fill. Instructions supplied. (SORRY, BUT THIS BATTERY IS AVAILABLE FOR UK DELIVERY ONLY FOR WHICH THERE IS A SPECIAL DELIVERY CHARGE OF 12 POUNDS STERLING PLUS VAT)

Product code: 091.490

The Classic Seat is styled to recreate the looks of seats of the classic period and ideally suited to Mini's, Triumph and MG sports cars. Made with black vinyl with white piping. Fitted with a headrest that can be removed if not required (not shown in drawing). The size of this standard version of the Classic Seat is height 540mm, length 540mm at base and width 475mm. For a pair of seat runners that will fit and work with this seat refer to 091.527

Product code: 090.103

Chrome finish mirror which is adjustable for height.The adjustment range is approximately 40mm in vertical height. The mirror is approximately 105 x 45mm. Base mounted by two screws at 32mm centres. As fitted to the Jaguar XK140.

Product code: 552687

Retaining Spring to hold the lamp unit into the retaining rim on Early PF770 Headlamps. Use in conjunction with the retaining rim and the seating rim. This part is also used should you choose the 7in adaptor rim

Product code: 092.SOXE

A pair of textile anti skid covers, quick and easy to fit, to give you traction on snow. Includes storage bag and gloves, 1 pair per pack. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.SOXI

A pair of textile anti skid covers, quick and easy to fit, to give you traction on snow. Includes storage bag and gloves, 1 pair per pack. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 094.320

Ital style Mirror in chrome and polished stainless steel with convex glass. Complete with rubber gasket. Use on either side of car. Can also be used as a wing mirror. Base mounted via a single stud, with a further 'pin' to provide location and prevent movement of the base once fitted. 2 holes are therefore required at approximatley 28mm centres. Base measures approximately 90 x 30mm.This style of mirror was commonly found on Porsche cars of the 1950's and 60's. Non handed so sitable for either side of your car.

Product code: 094.089

Tailor made to fit to the boot lid of this particular car and designed to be permanently fitted. Stainless steel, but if you want one chrome plated refer to 094.088 MADE TO OR DER 3-6 WEEKS

Product code: 094.095

Tailor made in stainless steel to fit to the boot lid of this particular car. Requires four holes in the bootlid. Supplied with bolts, nuts, washers and rubber gaskets MADE TO ORDER 3-6 WEEKS

Product code: 094.331

Overtaker outside round mirror for clamping to door frame edge. Chrome mirror head 100mm diameter, flat glass. The mounting bracket can be adjusted in relation to the arm simply by undoing the single central screw fixing and rotating the arm to the desired position, thus making the mirror completely universal. A smaller diameter version is also available

Product code: 090.176

Rectangular mirror that clamps to the glass channel to give you a view of vehicles overtaking. Flat glass. This mirror can be fitted to the quartelight frame or glass channel without drilling. Arm length approximately 70mm. Oval and round versions are also available

Product code: 094.337

Round mirror which clamps on to the glass channel to give you a view of vehicles overtaking. Flat glass. A convex glass version is available if required

Product code: 090.676

Raydot copy racing type with single bolt fixing. Lightweight aluminium with anodised finish. The head is 100mm diameter, the flat glass is 85mm diameter and it sits on a 40mm diameter base. For spare glasss see 090.826 (flat) or 090.827 (convex)

Product code: CSK82

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Rolls-Royce Silver Shadow with Carb ref FZX1104 or FZX1232, Jaguar XJ6 3.4 litre 1975-79, XJ6 4.2 litre 1975 on. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK50

Contains new jets, float valves and all gaskets and seals you would need to service a pair of carburettors on MGB 1798 cc 1972-80. Please note, however, that NEEDLES are not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK63

Contains new jets, float valves and all gaskets and seals you would need to service a pair of carburettors on Austin 3 litre 1967-68, MGC 1967-69, Triumph TR7 1974-76, Dolomite Sprint 1973-76, 2000 1975-76 and 2500 TC 1975. Please note, however, that NEEDLES are not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: 040.160

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for original negative earth cars without an electric washer function and post 1968

Product code: 040.163

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for cars converted from positive to negative earth and without an electric washer function

Product code: 092.P60

A pair of quick fitting diamond pattern chains to give you traction on snow, manufactured using mild steel with spring assisted tensioning system. 9mm projection for limited clearance applications. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.ZU104

A pair of premium quality diamond pattern chains to give you traction on snow and ice, manufactured using hardened manganese nickel steel alloy with reinforced links and automatic tensioning system - avoids having to stop and re-tension chain. 9mm projection for limited clearance applications. Reversible for longer life. Fitted in minutes without moving the car. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 090.347

Designed for cars of the Edwardian and Vintage periods that carry a spare wheel on the drivers (or indeed passengers) side running board, This is a rear view mirror that mounts on the top of the spare tyre by means of the leather strap provided. The strap has an effective maximum length of 480mm. Flat glass 105 mm diameter.

Product code: 090.109

Curved mirror arm with sprung base. Arm has a vertical height of approximately 100mm from the base to the centre of the mirror fixing hole. Polished chrome finish. Supplied complete with the nut to secure the mirror head. A straight arm is also available. A selection of round and rectangular mirror heads is avaialble with either flat or convex glass

Product code: 030.809

This 123 Ignition Distributor is specifically designed to replace Lucas distributors on pre SD1 Rover and Land Rover V8 engines. This type has a flat drive on the end of the shaft to drive the oil pump To set up this particular 123 distributor you will need a lap top with a shielded USB cable to connect it to the distributor. A manual of instructions for setting it up are supplied. For vehicles with Negative Earth only

Product code: 030.810

This 123 Ignition Distributor is specifically designed to replace Lucas distributors on all SD1 and onwards Rover and Land Rover V8 engines. There is no flat on the drive end shaft to drive the oil pump. To set up this particular 123 distributor you will need a lap top with a web connection and a shielded USB cable to connect it to the distributor.A manual of instructions for setting it up are supplied. For vehicles with Negative Earth only

Product code: 030.817

This distributor is designed for connecting to a computer to enable you to adapt the advance curve to suit your own requirements. Suitable for both 6 and 12 volt electrical systems, positive or negative earth. This unit will work both clockwise and anti-clockwise. It offers two sets of centrifugal advance curves (500 to 8000 rpm) that can be selected by placing a voltage on a wire from the distributor. (Handy, if you're driving on two different fuels, like regular fuel with LPG). Variable dwell. Spark-balancing, vacuum-advance and boost-retard, MAP-start field, rev.limiter. Ideal for working on a rolling road, Electronic dashboard. Everything you need! This is 123 part reference 123/TUNE-4-RV-G

Product code: 030.818

This distributor is designed for connecting to a computer to enable you to adapt the advance curve to suit your own requirements. Suitable for both 6 and 12 volt electrical systems, positive or negative earth. This unit will work both clockwise and anti-clockwise. It offers two sets of centrifugal advance curves (500 to 8000 rpm) that can be selected by placing a voltage on a wire from the distributor. (Handy, if you're driving on two different fuels, like regular fuel with LPG). Variable dwell. Spark-balancing, vacuum-advance and boost-retard, MAP-start field, rev.limiter. Ideal for working on a rolling road, Electronic dashboard. Everything you need! This is 123 part reference 123/TUNE-6-RV-G

Product code: 030.808

This 123 Ignition Distributor is specifically designed to replace Lucas distributors on classic MGA and MGB (4 cylinder) engines using Positive Earth. It offers 16 different advance curves that can be selected via a little switch which enables you to tune your engine to that of a particular Lucas distributor number (see below), plus a curve for 'Stage 2' engines. See also the pdf. It offers automatic dwell, spark balancing and automatic power cut off one second after engine stops to prevent coil overheating. This distributor can be wired to suit both positive and negative earth vehicles.

Product code: 030.821

This USB programmable distributor replaces 8 cylinder Rolls-Royce distributors. By connecting it to a computer, you can easily adapt it to fulfill even the most demanding requirements. The unit offers two sets of curves that can be selected by placing 12 volts on a wire from the distributor. Handy, if you're driving on two different fuels, like regular fuel and with LPG. Programmable via a screened USB cable and a laptop

Product code: 040.040

With chrome fittings and toughened glass. 205mm fixing centres. See detail below

Product code: 040.045

Made from perspex. Same shape as 040.040P but not drilled, enbling you to fit your own hinges or fit to a car other than a Cobra. We offer hinges, refer to 040.044

Product code: 015.501

For Autolite single choke carburettor Post 1970. With circular upstand to fit over carburettor, this has an internal diameter of 52.5 mm and is supplied with a worm drive hoseclip for making secure

Product code: 015.500

For Solex and Zenith 52mm carburettors. With circular upstand to fit over carburettor, this has an internal diameter of 52mm and is supplied with a worm drive hoseclip for making secure

Product code: 015.436

Chrome Air Filter for 1 1/2' Stromberg 150CD carburettor as used on Triumph Herald 13/60, 1300, Vitesse 1600 & 2000, GT6, 2000. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both an adaptor and a blanking plug for use when a breather pipe is not required, for this refer to 015.439.

Product code: 015.428

Chrome Air Filter for 1 3/4 Stromberg 175CD carburettor. Th is air filter is pierced for a breather pipe from the filter to the engine. A Breather Adaptor Kit contains both an adaptor and a blanking plug for use when the breather pipe is not required, for this refer to 015.439

Product code: 015.437

Chrome Air Filter for 1 3/4' Stromberg 175CD2 carburettor as used on Triumph Stag, Jaguar E Type V12, Lotus Elan +2 (1968-9), S4, Europa Special. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both an adaptor and a blanking plug for use when the breather pipe is not required, for this refer to 015.439

Product code: 015.416

Made by the original manufacturer to fit 1 1/2' SU carburettor for Austin Healey. NO BREATHER PIPE For version with bre ather pipe refer to 015.417.

Product code: 015.417

Made by the original manufacturer to fit 1 1/2' SU carburettor for Austin Healey. WITH BREATHER PIPE. For version without breather pipe refer to 015.416

Product code: 015.432

Chrome Air Filter for 1 1/2 SU carburettor H4, HD4 and HS4 as used on Austin Healey BJ7 Mk II, Mini 1275GT, MGB, MGB GT. This Air Filter is pierced for a breather tube from the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking grommet for use when the breather pipe is not required, for this refer to 015.439. The hole in the centre is 35 mm (1 3/8) diameter. One inch deep, with on e and a half inch clamping bolts.

Product code: 015.433

Chrome Air Filter for 1 1/2 SU carburettor H4, HD4 & HS4 wi th offset intake as used on Austin Healey 100 BN2, 100 BN4, Le Mans, 100S, 3000 Mk I, II & III, Mini Mk I, II, 850 and 1000 Automatics. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking grommet for use when the breather pipe is not required, for this refer to 015.439.

Product code: 015.418

Made by the original manufacturer to fit 1 1/2' SU carburettor for Triumph TR2. No breather pipe. Colour black

Product code: 015.413

Made by the original manufacturer to fit 1 1/4 SU carburett or for Austin Healey Sprite and Mini Cooper. WITH BREATHER PIPE. For version without breather pipe refer to 015.412

Product code: 015.412

Made by the original manufacturer to fit 1 1/4' SU carburettor for Austin Healey Sprite. NO BREATHER PIPE. For version with breather pipe refer to 015.413

Product code: 015.430

Chrome Air Filter for 1 1/4 SU carburettor HS and HS2 as us ed on Morris Minor 1000, MG Midget Mk I, II & III, Triumph Vitesse 1600, Spitfire Mk I, II, III, IV and 1500. This Air Filter is pierced for a breather tube from the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking grommet for use when the breather pipe is not required, for this refer to 015.439. The central hole is 33 mm (1.3 in) diameter

Product code: 015.431

Chrome Air Filter for 1 1/4' SU carburettor HS and HS2 with offset intake as used on Austin Healey Sprite Mk I, IIA, III & IV, Mini Mk I, II, 850 & 1000, Cooper, Cooper S, 1275 Cooper, Mini 1275 & Clubman. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking grommet for use when the breather pipe is not required, for this refer to 015.439.

Product code: 015.410

Made by the original manufacturer to fit 1 1/8' SU carburettor for Austin Healey Frogeye Sprite. NO BREATHER PIPE. For version with breather pipe refer to 015.411

Product code: 015.411

Made by the original manufacturer to fit 1 1/8' SU carburettor for Austin Healey Frogeye Sprite. WITH BREATHER PIPE. For version without breather pipe refer to 015.410

Product code: 015.151

Made by the original manufacturer to fit 1 3/4 SU carburett or for Austin Healey. NO BREATHER PIPE. For version with breather pipe refer to 015.419

Product code: 015.419

Made by the original manufacturer to fit 1 3/4' SU carburettor for Austin Healey. WITH BREATHER PIPE. For version without breather pipe refer to 015.151

Product code: 015.420

Air Filter made by the original manufacturer to fit 1 3/4' SU carburettor for Daimler SP250. Has breather pipe.

Product code: 015.422

Made by the original manufacturer to fit 1 3/4' SU carburettor for Jaguar XK, Triumph TR3 and TR4. No breather pipe

Product code: 015.421

Made by the original manufacturer to fit 1 3/4' SU carburettor for Jaguar XK (rear carburettor on right hand drive cars). No breather pipe.

Product code: 015.423

Made by the original manufacturer to fit 2 SU carburettor f or Aston Martin DB4. No breather pipe.

Product code: 015.424

Made by the original manufacturer to fit 2' SU carburettor for Austin Healey. No breather pipe. For version with breather pipe refer to 015.425.

Product code: 015.425

Made by the original manufacturer to fit 2' SU carburettor for Austin Healey. With breather pipe. For version without breather pipe refer to 015.424.

Product code: 015.435

Chrome Air Filter for 2' SU carburettor H8 & HD8 as used on Austin Healey BJ8 Mk III, Jaguar E Type 3.8 & 4.2, 420 4.2 litre, 420G, XJ6 2.8, 3.4 & 4.2, XJ12, Rover 2000TC. This Air Filter is pierced for a breather pipe from the Filter to the engine. A Breather Adaptor Kit contains both an adaptor and a blanking plug for use when a breather pipe is not required, for this refer to 015.439.

Product code: 015.427

Made by the original manufacturer to fit 2' front SU carburettor for Jaguar C Type. No breather pipe. For Air Filter for rear carburettor refer to 015.426.

Product code: 015.426

Made by the original manufacturer to fit 2' rear SU carburettor for Jaguar C Type. No breather pipe. For Air Filter for front carburettor refer to 015.427.

Product code: 015.438

Chrome Air Filter for 40 mm Weber 40DCOE carburettor as used on Lotus Elan Sprint, +2 (1967-8), +2S, S4, S4 S/E, +2S 130, +2S 130/5, Europa Twin Cam. Supplied with two gaskets

Product code: 015.434

A pair of Chrome Air Filters for 1 3/4' SU carburettors H6, HD6 & HS6 as used on Austin Healey BJ7 Mk I, Rover 2200TC, Rover 3.5, 3500, Triumph TR3, 3a, 4 & 4a, MGC. These Air Filters are pierced for breather pipes for the Filter to the engine. A Breather Adaptor Kit contains both the adaptor and a blanking plug for use when the breather pipe is not required, for this refer to 015.439. The holes in the centres are 41.5 mm (1 5/8') diameter

Product code: 094.869

The Alpine Seat is styled to recreate the looks of seats of the classic period. The outer parts of the seat are in black quilted effect vinyl and the centre in black cord. Fitted with a headrest that can be removed if not required (not shown in drawing). The size of the wide version of the Alpine seat is height 540mm, length 540mm at base and width 520mm. For a pair of seat runners that will fit and work with this seat refer to 091.527

Product code: 090.297

Lightweight aluminium wing mounted racing type with two bolt fixing. Convex glass 100mm diameter.

Product code: 065.001

Suitable for use on all makes of vintage car. This is the latest high efficiency model with improved friction discs 3 1/2 diameter, self locking indicator, dual control springs an d non-corrosive friction plates. Both arms are the same length 4 1/2 and are fitted with rubber bushes. One blade into two blades at the friction end. Suitable for smaller vehicles up to 1,000 kg weight MADE TO ORDER 3-6 WEEKS

Product code: 065.012

Suitable for use on all makes of vintage car. This is the latest high efficiency model with improved friction discs 3 1/2 diameter, self locking indicator, dual control springs an d non-corrosive friction plates. Both arms are the same length 4 1/2 and are fitted with rubber bushes. Two blades into three blades at the friction end. Suitable for medium vehicles from 1,250 to 1,500 kg weight MADETO ORDER 3-6 WEEKS

Product code: 065.917

Axle set of Brake Pads for the two front disc brakes of the Aston Martin DB6 '66-71, DBS (not V/8) '67-75, Volante '78-89, Jaguar Double-Six 2.8/3.4 '69-71, 4.2 '71-74, E Type 3.8/4.2 '68-71, E Type V12 '71-74, XJ 2.8/3.4/4.2/5.3 '69-73, Jensen Interceptor 6.2/7.2 '69-72, Lotus Elite 2.0/2.2 '73-82, Mercedes-Benz 220/230/240/250/280/300 '68-76, Reliant Scimitar 3.0 GTE 3.0 '68-71, Austin 1800 Mk I '64-68, 2000/2200 '72-75, 3000 '67-71, Rover P5B 1968-69, Wolseley 18/85 '69-72, Six '72-75 and Volvo 1800/221 8V '69-70. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use

Product code: 094.090

Works pattern. Tailor made to fit the boot lid of the Austin Healey 3000. Fits to boot hinges at the front using the special bolts supplied and stands on the bumper at the rear. Also supplied are two small brackets requiring four small holes in the lip of the boot lid. Brackets, bolts, washers and gaskets supplied. Chrome plated

Product code: 094.092

Tailor made to fit to the tail of this particular car and designed to be permanently fitted. Chrome plated MADE TO ORDER 3-6 WEEKS

Product code: 090.307

Auto Repair Wall Sign 41 x 30cm

Product code: 090.274

Black wing mounted racing type with two bolt fixing. Convex glass 100mm diameter.

Product code: 090.273

Chrome on copper wing mounted racing type with two bolt fixing. Convex glass 100mm diameter

Product code: 080.935

Black hard rubber cased 12 volt classic car battery type 242. Rating 60 amp/hour (at 20 hour rate). Length 307mm (12.1 in), width 170 mm (6.7 in) height 222mm (8.7 in). For the UK this battery is supplied to your door in dry condition with the acid in a container ready for you to fill. Instructions supplied. (SORRY, BUT THIS BATTERY IS AVAILABLE FOR UK DELIVERY ONLY FOR WHICH THERE IS A SPECIAL DELIVERY CHARGE OF 12 POUNDS STERLING PLUS VAT)

Product code: 080.937

Black hard rubber cased 12 volt classic car battery type 291. Rating 73 amp/hour (at 20 hour rate). Length 251mm (9.9 in) width 165mm (6.5 in) height 224mm (8.8 in). For the UK this battery is supplied to your door in dry condition with the acid in a container ready for you to fill. Instructions supplied. ( SORRY, BUT THIS BATTERY IS AVAILABLE FOR UK DEL IVERY ONLY FOR WHICH THERE IS A SPECIAL DELIVERY CHARGE OF 12 POUNDS STERLING PLUS VAT)

Product code: 080.950

Black hard rubber cased 6 volt classic car battery type 421. Rating 57 amp/hour (at 20 hour rate). Length 169mm (6.7 in), width 174mm (6.9 in) height 218mm (8.6 in). For the UK the battery is supplied to your door in dry condition with the acid in a container ready for you to fill. Instructions supplied. (SORRY, BUT THIS BATTERY IS AVAILABLE FOR UK DELIV ERY ONLY FOR WHICH THERE IS A SPECIAL DELIVERY CHARGE OF 12 POUNDS STERLING PLUS VAT) MADE TO ORDER 3-6 WEEKS

Product code: 080.951

Black hard rubber cased 6 volt classic car battery type 501. Rating 85 amp/hour (at 20 hour rate). Length 224mm (8.8 in), width 173mm (6.8 in) height 215mm (8.5 in). For the UK the battery is supplied to your door in dry condition with the acid in a container ready for you to fill. Instructions supplied. (SORRY, BUT THIS BATTERY IS AVAILABLE FOR UK DELIV ERY ONLY FOR WHICH THERE IS A SPECIAL DELIVERY CHARGE OF 12 POUNDS STERLING PLUS VAT)

Product code: 052.166/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. This helmet is made to special order and cannot be returned to us if it is the incorrect size, so please be sure you are ordering the right size. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards MADETO ORDER 3-6 WEEKS

Product code: 052.155/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also with peak. However, Davida Classic Helmets do not comply with any current helmet safety standards MADE TO ORDER 3 WEEK DELIVERY TIME.

Product code: 052.160/L

Retains all the original design features of the 1950's low dome racing helmet. These are hand built products of exceptional quality. Fibreglass composite shell retained using studs and nylon webbing with double D ring, peak, leather interior with adjustable two tier cotton webbed harness, locked stitched using strong nylon thread. Other sizes and colours available, also without peak. However, Davida Classic Helmets do not conform to any current helmet safety standards MAD ETO ORDER 3-6 WEEKS

Product code: 092.728

Made from polished stainless steel and guaranteed against corrosion. It sits on four rubber feet on the boot lid and is retained on the edge of the lid by adjustable clamps. Alternatively, the four feet are tapped M6 and it would be possible to bolt through your boot lid into the feet to secure the rack permanently. Platform size 880 mm wide by 375 mm deep. Will fit across boot lids from 690 to 1360 mm wide and at least 515 mm from front to back

Product code: 080.546

Powerful 12 volt Fan Motor with 5/16 in shaft. A nice motor with cast end plates which can be wired up to rotate in either direction. Can be used to uprate the heater on the Jaguar Mk II. Use with Mounting Plate 080.547 and Fan 080.558

Product code: 080.514

12 volt Fan Motor for Clayton Heaters. You can connect this up to rotate in either direction. (Please note that the supplier makes this from a motor with a double ended shaft by cutting off one end of the shaft)

Product code: 080.545

12 volt Fan Motor for Clayton Heaters. You can connect this up to rotate in either direction

Product code: 040.153

Comprises plastic connector block and suitable terminals to enable you to make up a harness plug to fit the socket on Lucas 2 speed wiper motors

Product code: 094.312

Black surround to mirror, ball mounted onto a chrome stem. Mirror is 120 x 55mm and of 85mm overall height. Mounting is via two 6mm dia. holes at 39mm centres

Product code: 090.101

Chrome finish arm with painted gold mirrormirror, in a style that fits perectly with cars of the 1950's and 1960's. Mirror is 127 x 50mm and 91mm overall height. A version of this mirror is available with a chrome back to the mirror head. This style of mirror was original equipment on the MGA

Product code: 090.276

Chrome finish with mirror of approximately 170 x 62mm, The overall height is 110mm. Base mounted by 2 screws. A version of this mirror is available with a smaller mirror head if required.

Product code: 090.276

Chrome finish with mirror of approximately 170 x 62mm, The overall height is 110mm. Base mounted by 2 screws. A version of this mirror is available with a smaller mirror head if required.

Product code: 090.100

Chrome finish mirror 113 x 40mm. This style of mirror was fitted to the Jaguar XK120 and this is the taller version at 55mm overall height. A longer stem (125mm) version of this mirror is also available.

Product code: 090.198

Chrome and stainless steel, mirror of approximately 120 x 65mm and 118mm in overall height. Installed using a single 8mm dia. stud at the base. Supplied with the stud, a nut & washer and a base gasket.

Product code: 090.275

Chrome finish with mirror of approximately 127 x 53mm, The overall height is 105mm. Base mounted by 2 screws. A version of this mirror is available with a larger mirror head.

Product code: 090.102

Chrome finish mirror 113 x 40mm. This style of mirror was fitted to the Jaguar XK120 and this is the taller version at 125 mm overall height. A shorter stem (55mm) version of this mirror is also available.

Product code: 090.279

Chrome and stainless steel mirror of approximately 150 x 60 mm. The ball joint between the mounting arm and the mirror head moves through 180 degrees, so this mirror is suitable for mounting either at the top of the windscreen or on the dash. When dash mounted overall height would be 90 mm. 39 mm hole centres

Product code: 090.156

A universal base mounted door mirror with round head, The mirror head is approximately 107mm diameter and has a flat glass, mounted to the arm via a ball mounting to allow adjustment, the base can be fitted to either side of a car, as the handing can be reversed by simply fitting the swivel ball to the oposite side of the arm. The arm is not sprung, and is mounted to the surface of your panel. Supplied with fixings and a base gasket.

Product code: 090.223

A chromed racing door mirror specifically designed to look good on Minis. With convex glass. On late Minis you can take the original mirror off and fit this mirror using a mounitng kit. The corresponding right hand door mirror and a flat glass version are also available

Product code: 090.225

A chromed racing door mirror specifically designed to look good on Minis. With flat glass. On late Minis you can take the original mirror off and fit this mirror using a mounitng kit. The corresponding right hand door mirror and a convex glass version are also available.

Product code: 090.222

A chromed racing door mirror specifically designed to look good on Minis. With flat glass. On late Minis you can take the original mirror off and fit this mirror using a mounitng kit. The corresponding left hand door mirror and a flat glass version are also available.

Product code: 090.224

A chromed racing door mirror specifically designed to look good on Minis. With flat glass. On late Minis you can take the original mirror off and fit this mirror using a mounitng kit. The corresponding left hand door mirror and a convex glass version are also available

Product code: 090.135

A rectangular door mounted mirror with a flat glass. Mounts onto the left hand door. A matching mirror for the right hand door is also available. These mirrors are typical of those used in the 1970's. If you are planning on fitting this mirror to the MG Midget or early Mini you will need a mounting kit, A separate kit is required for later Minis

Product code: 090.126

A rectangular door mounted mirror wiht a flat glass. Mounts onto the right hand door. A matching mirror for left hand door is also available. These mirrors are typical of those used in the 1970's. If you are planning on fitting this mirror to the MG Midget or early Mini you will need a mounting kit, A separate kit is required for later Minis

Product code: 081.200

Dynalite replacement for Lucas C39 & C40 Dynamo. This unit offers the advantages of a 45 amp lightweight alternator, but built into a dynamo type casing. The unit has its own internal regulator so there is no need for an external type. Your existing Voltage regulator can be used simply as a junction point for the wiring, but we recommend using one of our dummy control boxes that includes a heavy duty fuse to protect your wiring loom or indeed your Dynalite from any wiring problems. A choice of pulley options are available separately. A Positive Earth version is also available

Product code: 081.201

Dynalite replacement for Lucas C40L Dynamo, (This is the longer bodied version of the C40). This unit offers the advantages of a 45 amp lightweight alternator, but built into a dynamo type casing. The unit has its own internal regulator so there is no need for an external type. Your existing voltage regulator can be used simply as a junction point for the wiring, but we recommend using one of our dummy control boxes that includes a heavy duty fuse to protect your wiring loom or indeed your Dynalite from any wiring problems.A choice of pulley options are available separately

Product code: 010.017

Fixing Kit for two Early PF770 Headlamps. This kit contains the necessary parts to allow adjustment of the lamp in relation to the backshell, and thus allow correct focusing of the lamp. The fixings to mount the backshell are included with the backshell itself.

Product code: 010.019

Gasket to fit between the headlamp bowl and the inside of the wing when fitting the arly PF770 Headlamp backshell to a car. As fitted to Rolls-Royce, Bentley and Jaguar XK120

Product code: 552704

Inner Seating Rim for Early PF770 Headlamps. This is part of the rim that retains the light unit and is used in conjunction with the retianing rim and spring.

Product code: 552686

This part, when used in conjunction with the retaining spring and seating rim are used to mount the lamp unit to early pattern PF770 backshells (you will also need the fixings kit) Should you wish to use 7 inch headlamps in place of the original PF770, you must swap this part for the Adaptor Ring for 7in lamps

Product code: 092.SOXD

A pair of textile anti skid covers, quick and easy to fit, to give you traction on snow. Includes storage bag and gloves, 1 pair per pack. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.SOXF

A pair of textile anti skid covers, quick and easy to fit, to give you traction on snow. Includes storage bag and gloves, 1 pair per pack. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.SOXG

A pair of textile anti skid covers, quick and easy to fit, to give you traction on snow. Includes storage bag and gloves, 1 pair per pack. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.SOXH

A pair of textile anti skid covers, quick and easy to fit, to give you traction on snow. Includes storage bag and gloves, 1 pair per pack. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.SOXJ

A pair of textile anti skid covers, quick and easy to fit, to give you traction on snow. Includes storage bag and gloves, 1 pair per pack. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 015.170

Alloy head and glass bowl. Fuel is fed in at the right hand side and out on the left. Can be fitted using two fitting kits 015.248 or by using two banjo bolts 015.168, two banjos 015.169 and four washers 015.200. Thread size is 1/2 in x 20 UNF. Use with 5/16 in push on pipe secured with a hose clip with either. Comes complete with filter/strainer which can be dismantled for cleaning. If you are unlucky and break the (strong) glass bowl we sometimes have them, refer to 015.249

Product code: 094.323

Fits inside the end of the Handlebar. The Mirror is held securely by an expanding sleeve which has equal expansion over its full length, thus it will not cause distortion to the handlebar tube. This Mirror is suitable for right and left hand sides. Supplied with convex glass. For other head shapes refer to 094.325 & 094.339

Product code: 094.325

Fits inside the end of the Handlebar. The Mirror is held securely by an expanding sleeve which has equal expansion over its full length, thus it will not cause distortion to the handlebar tube. This Mirror is suitable for right and left hand sides. Supplied with convex glass. For other head shapes refer to 094.323 & 094.339

Product code: 094.328

Pair of Handlebar Rear View Mirrors with the 10 mm standard thread which should fit your mirror mount. Mirror head size 130 mm x 75 mm on long stem. If you have no mirror mount refer to 094.329

Product code: 094.327

Handlebar Rear View Mirror with the 10mm fine thread which sshould fit your mirror mount. Mirror head size 130mm x 75mm on short stem. If you have no mirror mount refer to 094.3 29

Product code: 080.505

This is a replacement for Smiths circular heater element with straight pipes as shown in the picture and is supplied without the motor plate. The elements Smiths originally made were of three depths, 2 1/4, 3 and 4 in. This replacement is 2 5/8 in depth but comes with three new clips which enable you to reassemble your heater with the new element. A small adjustment to the fan position on the motor shaft may be required. This type of heater was fitted to the Land Rover Series I & II

Product code: 015.514

Hoses are factory swaged to your requirements and for this we need the following information : a) Classic Black or Stainless Steel covered. b) 1/2 BSP or 5/8 BSP. c) Face to face length. d) Ends required, straight, 45 Elbow, 90 Elbow or 180 Elbow. e) Angle between ends if more than one elbow is specified. Angle is measured anti-clockwise as indicated on the drawing below: MADE TO ORDER 3-6 WEEKS

Product code: 065.916

Axle set of Brake Pads for the two rear disc brakes of the Jaguar 4.2 1968-86, Jaguar E Type 3.8/4.2 1968-74, Jaguar E Type V12 5.3 1968-74, Jaguar XJS 5.3 1975-89, Jaguar XJ6 Series III 3.4/4.2 1979-86, Jensen Interceptor 6.2/7.2 1969-72, TVR Tasmin 100/200/280i/350i 1979-83 and AC 3.0 EM 1975-81. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use

Product code: 065.921

Axle set of Brake Pads for the two front disc brakes of the Jensen Interceptor Mk III 1972-76. Two of the pads have a wire to connect to the wear indicator. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use MADE TO ORDER 3-6 WEEKS

Product code: 010.014

For Late PF770 headlamps as fitted to Rolls-Royce, Bentley, Jaguar, Bristol, Aston Martin and Jowett. The identifying feature for the late PF770 headlamp is that the lip is turned outwards. Seating and retaining rims are available for both original 7.1/2 inch lamps and more modern 7 inch lamps. Click the links below for an exploded diagram of a complete PF770 lamp

Product code: 010.197

Rubber gasket to fit between the headlamp backshell and the wing or front panel when fitting late type PF770 backshell

Product code: 010.016

This is the rim that forms the rear part of the mounting for the lamp unit, and locates on the 3 adjusting screws. Use in conjunction with the retaining rim. For Late PF770 Headlamps as fitted to Rolls-Royce, Bentley, Jaguar, Bristol, Aston Martin and Jowett. Scroll down for more information

Product code: 553878

Retaining Rim for Late Type PF770 Headlamps. Used in conjunction with the seating rim to hold the lamp unit in position. Polished chrome finish. Scroll down for more information

Product code: 090.668

Lightweight racing type. Require hole 6 mm diameter. Adjustable. Flat glass 110 x 50 mm. For right hand version refer to 090.669.

Product code: 090.669

Lightweight racing type. Require hole 6 mm diameter. Adjustable. Flat glass 110 x 50 mm. For left hand version refer to 090.668.

Product code: 090.173L

As near as you will get to the Lucas 406 wing mirror as fitted on the front wings of 1930's cars and continuing as an accessory into the 1960's. These mirrors do not have the spring back feature, being securely mounted via a single stud. This version has a convex glass of 107mm diameter.A flat glass version is also available. Handed as shown in the picture. Whilst this mirror is listed as a wing mirror, it can also be fitted on a door, Chrome finish and supplied with the base gasket.

Product code: 090.173R

As near as you will get to the Lucas 406 wing mirror as fitted on the front wings of 1930's cars and continuing as an accessory into the 1960's. These mirrors do not have the spring back feature, being securely mounted via a single stud. This version has a convex glass of 107mm diameter.A flat glass version is also available. Handed as shown in the picture. Whilst this mirror is listed as a wing mirror, it can also be fitted on a door, Chrome finish and supplied with the base gasket.

Product code: 090.123L

As near as you will get to the original Lucas 406 wing mirror as fitted on the front wings of 1930's cars and continuing as an accessory into the 1960's. These mirrors do not have the spring back feature, being securely mounted via a single stud. This version has a flat glass of 107mm diameter.A convex glass version is also available. Handed as shown in the picture. Whilst this mirror is listed as a wing mirror, it can also be fitted on a door, Chrome finish and supplied with the base gasket.

Product code: 090.123R

As near as you will get to the Lucas 406 wing mirror as fitted on the front wings of 1930's cars and continuing as an accessory into the 1960's. These mirrors do not have the spring back feature, being securely mounted via a single stud. This version has a flat glass of 107mm diameter.A convex glass version is also available. Handed as shown in the picture. Whilst this mirror is listed as a wing mirror, it can also be fitted on a door, Chrome finish and supplied with the base gasket.

Product code: 37552

Lucas Fuse Box with clip on cover for four glass type fuses. There is provision to store two spare fuses, ready in case they are needed. Each end of each fuse has two 6.4 mm Lucar connections sideways from the Fuse Box, two of which are joined by a 'common link' underneath as shown below. There are several variants of the 7FJ fuse box, the difference being terminal orientations and / or pairings.

Product code: 030.250

Replaces Points and Condenser and unaffected by Distributor shaft wear. Unique optical trigger provides pinpoint firing accuracy. Improves starting and increases fuel economy. Maintenance free. You will also need a Fitting Kit to suit your particular distributor, refer to 'Lumenition Fitting Kits'. This comes with instructions for fitting to a negative earth car. If your car is positive earth it can still be fitted by refering to the drawing below. A version of this product is available to fit AC-Delco Distributors. A Performance version is also available, as is a mounting bracket for the power pack. Both the power pack and the optical switch are avaialble individually as a replacement part.

Product code: 31311

Lucas SPB120 style surface mounted indicator switch. This switch features a red warning lamp in the centre, The switch has a sprung roller to make the contacts between the terminals on the rear, which provides a very positive action when operated. For wiring instructions, please see the links below, where the Wiring Diagram offers instructions for a 4-Pin flasher unit, and the Technical Drawing offers Instructions for a 3-Pin flasher unit.

Product code: SPB120

Lucas SPB120 style surface mounted indicator switch. This switch features a red warning lamp in the centre, The switch has a sprung roller to make the contacts between the terminals on the rear, which provides a very positive action when operated. For wiring instructions, please see the links below, where the Wiring Diagram offers instructions for a 4-Pin flasher unit, and the Technical Drawing offers Instructions for a 3-Pin flasher unit.

Product code: 094.080

Tailor made to fit over the petrol tank of this particular car and designed to be permanently fitted. Chrome plated, but if you want one in stainless steel refer to 094.081 MA DE TO ORDER 3-6 WEEKS

Product code: 094.082

Tailor made to fit over the petrol tank of this particular car and designed to be permanently fitted. Chrome plated

Product code: 094.085

Tailor made to fit over the petrol tank of this particular car and designed to be permanently fitted. Stainless steel, but if you want one chrome plated refer to 094.084 MADE TO ORDER 3-6 WEEKS

Product code: 094.086

Tailor made to fit to the boot lid of the MGA. Bolts, nuts, washers and gaskets supplied. Fitting requires six holes in the boot lid. Chrome plated, but if you prefer one in stainless steel refer to 094.087

Product code: 094.087

Tailor made to fit to the boot lid of the MGA. Bolts, nuts, washers and gaskets supplied. Fitting requires six holes in the boot lid. Stainless steel. If you prefer one chrome plated refer to 094.086

Product code: 065.903

Axle set of Brake Pads for the two front disc brakes of MGB (not V8) 1962-81, Triumph 2000 to chassis 6435 1963-64 and Sunbeam Rapier 1959-63. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use. Original Equipment Part No. was GBP202

Product code: 065.906

Axle set of Brake Pads for the two front disc brakes of the MGBGT V8 1973-76, Triumph 2000 1969-77, Triumph 2.5, 2500 1969-77, Triumph Stag 1969-77, Triumph TR8 1980 on, Vauxhall Victor 1973-78, VX1800, 2300 1976-78, Ventora 1973-76 and Rover SD1 1976-82. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use. Original Equipment Part No. GBP240

Product code: 065.911

Axle set of Brake Pads for the two front disc brakes of Mini Coopers 1961 to 1969. These Brake Pads are asbestos free. Original Equipment Part No. GBP102

Product code: 065.912

Axle set of Brake Pads for the two front disc brakes of Mini Cooper S 1275 March 1963-1971 and Mini 1275GT October 1969 to June 1974 with 10 inch wheels. These Brake Pads are asbestos free. Original Equipment Part No. GBP103

Product code: 065.920

Axle set of Brake Pads for the two front disc brakes of the Classic Mini Cooper S 970/1071/1275 cc from 1963-71 and 1.3 from 1969-77. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use

Product code: 065.910

Axle set of Brake Pads for the two front disc brakes of Minis with 12 in. wheels made from 1984 to 1991. These Brake Pads are asbestos free. Original Equipment Part No. GBP307

Product code: 094.130

Mounting arm for the Lucas 160 type mirror. This mirror arm has a flat base with 2 holes at approximately 78mm hole centres. It was designed to mount to the windscreen frame on MG MMM and TA - TC models. However, it can be fitted to pretty well any other type of vehicle. This particular arm is shaped for the left hand side. A right hand version is also available, as is more universal type bolt fix version.

Product code: 094.131

Mounting arm for the Lucas 160 type mirror. This mirror arm has a flat base with 2 holes at approximately 78mm hole centres. It was designed to mount to the windscreen frame on MG MMM and TA - TC models. However, it can be fitted to pretty well any other type of vehicle. This particular arm is shaped for the right hand side. A left hand version is also available, as is more universal type bolt fix version.

Product code: 094.329

For use with mirrors with 10 mm standard thread, including 094.327 and 094.328. Clamps on to 22mm diameter handlebars

Product code: 065.914

Axle set of Brake Pads for the two front disc brakes of Morgan +8 3.5, EFi, 3.9 1978 on. These Brake Pads are asbestos free

Product code: 065.913

Axle set of Brake Pads for the two front disc brakes of Morgan 4/4 1600, TC, 1600 (OHV) 1968-85, Jensen Healey and GT 1972-76, Lotus Esprit S1, S2, S3 1975-87, Ford Capris Mk I and II 1968-77, Triumph Dolomite 1973-80, Toledo 1970-76, Hillman Avenger 1976-78, Sunbeam Lotus 1976-79, Vauxhall Firenza, Magnum (with Girling brakes), Viva 1971-78 and Volvo 300/340/360 from 1976-82. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use

Product code: 094.317

Replacement in polished stainless steel for the factory fitted Door Mirror. Use with Mirror Head 094.318. Made to suit existing hole fixing, it comes with a new rubber seal. Made from the best quality materials to a high standard of finish. Ideal as a finishing touch to a restoration or simply to replace parts that have got tired. British made

Product code: 094.309

Used to fit interior mirrors 094.315 and 094.316 to the screen. Comprises two parts, the cast metal pad that you bond to the screen and the plastic cover that holds the mirror in place. All parts can be used on other cars MADE TO ORDER 3 -6 WEEKS

Product code: 065.915

Axle set of Brake Pads for the two front disc brakes of the Morgan 4/4 1961-67, Morgan Plus 4 Plus 1964-67, Morgan Sports 1959-67, TVR Grantura 1962-66, TVR Griffith 1965-66 and Ford Cortina Mk 1 1500GT 1963-67. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use

Product code: 091.971

Comprises a set of four swivel casters for the lift as an alternative to the standard ones. Developed for single car garages but also for overcrowded garages. With these fitted you can drive the vehicle over the low profile Cross Spacers and then you roll the lift under your car in the usual way

Product code: 090.149

Oval type Desmo convex glass mirror suitable 'A' post or windscreen pillar fitting. Ideal for vehicles of the 1920's and '30's, 110mm x 82mm (overall length 175mm). complete with mounting bracket 58mm x 14mm, hole centres 43mm approx. A fitting kit is available as is a flat glass version.

Product code: 094.332

Overtaker outside round mirror for clamping to door frame edge. Chrome mirror head 75mm diameter, flat glass. The mounting bracket can be adjusted in relation to the arm simply by undoing the single central screw fixing and rotating the arm to the desired position, thus making the mirror completely universal. A smaller diameter version is also available

Product code: 090.178

Oval mirror that clamps to the glass channel to give you a view of vehicles overtaking. Flat glass. This mirror can be fitted to the quartelight frame or glass channel without drilling. Arm length approximately 70mm. Round and rectangular versions are also available

Product code: 090.177

Round mirror that clamps to the glass channel to give you a view of vehicles overtaking. Flat glass 105mm diameter. This mirror can be fitted to the quartelight frame or glass channel without drilling. Arm length approximately 70mm. Oval and rectangular versions are also available

Product code: 094.333

Round mirror which clamps on to the glass channel to give you a view of vehicles overtaking. Flat glass.

Product code: 094.330

Round mirror which clamps on to the glass channel to give you a view of vehicles overtaking. Convex glass.for improved visibility. A flat glass version is also available if required.

Product code: 094.336

Chrome mirror which clamps on to body seam of your Classic Mini to give you a view of vehicles overtaking. Flat glass. The design of this is such that it can only be mounted on the right hand side of the body of classic Minis.A round version of this mirror is also available

Product code: 094.334

Chrome mirror which clamps on to body seam of your Classic Mini to give you a view of vehicles overtaking. Round mmirror of 75mm diameter with a flat glass. The design of this is such that it can only be mounted on the right hand side of the body of classic Minis.A rectangular version of this mirror is also available

Product code: 094.321

Convex glass mirror of 110mm diameter, looking similar to the Lucas 406 type, but not having the visible clamp on the rear of the mirror head. Single stud fixing and supplied with the base rubber

Product code: 010.012

For Early PF770 Headlamps as fitted to Rolls-Royce, Bentley and Jaguar XK120. The identifying feature for the early PF770 headlamp is that the lip is turned inwards and the bowl mounts from behind the wing panel rather than pudhing through from the front. A comprehensive range of parts are available for both early and late PF770 lamps. Scroll down for more information. For later version refer to 010.014.

Product code: 094.940

Everything you need to enable you to clean and seal pinholes and seams from the inside of your fuel tank. Repairing the tank is more than just pouring in a quart of sealer and sloshing it around. If gum, sludge, or fuel are inside, they must be removed first, otherwise tank sealers will not work. Kit contains: 1 x 0.946 litre Cleaner Degreaser to remove gum, sludge, varnish, 1 x 0.946 litre Metal Prep to prepare your tank for the Tank Sealer and 1 Quart Tank Sealer. This is sufficient to seal a tank of approximately 25 Gallon capacity. This does depend on the shape and internal construction of the tank. Not suitable for fibreglass tanks. We strongly reccommend that you watch our accompanying video

Product code: 094.941

POR-15 U.S. Standard Fuel Tank Sealer was formulated and developed by POR-15 due to the demand for a high-tech sealer impervious to all fuels, including the new Stage II fuels which have a high alcohol content. It has superior strength and fuel resistance, and does not contain Methyl Ethyl Ketone, a highly flammable and deadly carcinogen (cancer-causing). POR-15 U.S. Standard Fuel Tank Sealer is non-flammable and is environmentally safe. One tin is suitable for a tank of approximately 12 gallons capacity. If your tank has not been used for a while or is rusted or has sludge in it we would suggest the full POR-15 Fuel Tank Repair Kit.

Product code: 090.296

Bright polished aluminium and chrome mirror, with single stud mounting at the based. This mirror has a flat glass. Supplied with a base gasket and mounting stud. A version of this mirror is available with a convex glass

Product code: 090.678

Raydot copy racing type with single bolt fixing. Lightweight aluminium painted black. Head is 100 mm diameter, the flat glass is 85 mm diameter. For spare glasss see 090.826 (flat) or 090.827 (convex)

Product code: 090.131

Raydot copy racing type with single bolt fixing. Lightweight aluminium with polished finish. The head is 100mm diameter, the flat glass is 85mm diameter and it sits on a 40mm diameter base. For spare glasss see 090.826 (flat) or 090.827 (convex)

Product code: 090.125

Rectangular vintage style mirror for 'A' post or windscreen pillar fitting.This convex glass mirror measures 142 x 65mm, and has a chrome plated finish. A Kit of Parts for fitting this mirror is available, as are oval style mirrors

Product code: 065.919

Axle set of Brake Pads for the two front disc brakes of the Rover P6 SC/P6 TC 2.0 1972-77, Lotus Eclat 2.0/2.2 1975-82, Elan 1.6 1972-75, Morgan Plus 8 3.8 1974-76, Triumph GT6 2.0 1972-74, TR6 2.5 1972-75, TVR Tasmin 100/200 1979-83, 280i, 350i 1979-83, AC 3.0 EM 1875-81, Ford Capri Mk III 1.6 1978-86, Capri Ghia 2.0 1977-86, Capri Mk III 3.0 1977-81, Consul 2.0/2.1D/2.3 1972-75, Cortina Mk III, IV, V 1.3/1.6/2.0/2.3 1970-83, Escort Mk II 1.3/1.6/2.0 1975-79, Granada Mk II, III 1.7L/2.0/2.3/2.5/2.6/3.0 1974-81. These Brake Pads are made in England by MINTEX and are asbestos free. They carry a 12 month/15,000 mile guarantee under normal road use

Product code: CSK24

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Alvis TB21 Sports 1952, Bentley R Type with carb ref AUC594 1952-55, Lagonda Mk I Vantage 2.5 litre 1951-53, Jaguar Mk VII 1951-56, XK120 1951-54, C Type 1952 and XK140 1954-56 except 9:1 compression ratio. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line. For the equivalent Rebuild Kit refer to CRK240

Product code: CSK32

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor as fitted to Bentley R Type 4.5 litre 1954-55 (not those with the oil bath oil cleaner). Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK37

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Alvis TD21 1959-64, TF1965-66, Armstrong Siddeley 234 Sapphire 4 cylinder 1955-58, Austin Princess DN7 1956, Austin Healey 100-6 BN6 1957-59, 3000 Mk I BN6, BN7, BT7 1959-61, Daimler Conquest Century 1955-57, Regency 1958-59, SP250 Dart 1959-61, 2.5 litre Saloon 1964-68, Jaguar Mk I 2.4/3.4 litre 1956-1959, Mk VIII 3.4 litre 1956-59, Mk IX 3.4/3.8 litre 1959-62, MK II 1960-64, XK150 3.4/3.8 litre 1959-62 and S Type/340 1967-68. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If this is not the CSK service kit you need please click on the image below to find it

Product code: CSK30

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Rolls-Royce Silver Cloud III 1962-64, Silver Shadow 1965-68, Bentley S3 1962-64, T Series 1965-66. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK38

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Aston Martin DB4 1958-63, DB5 1963-65, DB6 1965-70, Austin Healey 3000 Mk III BJ8, Daimler Majestic Major 1959-68, Limousine 1970-72, Sovereign 2.8/4.2 litre 1968-71, Jaguar XK150S 1959-62, 420 1967-68, XJ6 2.8/4.2 litre 1968-71, Rover 110 1962-4, P4 1963 with carb ref AUD62, P5 1958-67, P6 1978 with carb ref AUD92 and Land Rover 109 LHD 1967-68. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above

Product code: CSK51

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Austin A40 Mk II 948/1098 cc 1961-67, A55 1957-61, A60 1961-69, Austin-Morris 1100 (not automatic) 1962-74, Mini (not automatic) 1959-74, Mini Clubman (not automatic) 1969-74, Morris Minor 1000 1960 to 1970, Oxford Series V 1959-60, Series VI 1961-62, Riley Elf 1961-69, Wolseley 15/50 1958-59, 15/60 1959-61, 16/60 1961-62, 1500 1959-64 and Hornet 1961-69. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below and select the CSK number you need

Product code: CSK39

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Austin Healey 3000 Mk II BN7, BT7 with rear carb ref AUD18R 1961-62 and Reliant Scimitar straight six with front carb ref AUD161F 1965-66. (For the other Austin Healey and Reliant carbs refer to CSK59). Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK52

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Austin Morris 1100 Auto 1965-74, 1300 1967-72, Hillman Hunter 1500/1700 1972-73, Mini Automatics 848/998 1959-74, Clubman 1970-74, MG 1300 1967-69, Midget 1500 1974, Riley Kestrel 1967, Triumph Spitfire 1500/Toledo TC/1500 TC all with front carb ref AUD665F 1974-75 and Wolseley 1300 1967-68 etc. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone

Product code: CSK54

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Austin Princess 1800 manual and automatic 1975-76, Morris Marina 1.8 litre manual and automatic 1971-79, Marina 1750 Auto 1975-77, Wolseley 18/85 Auto 1967-71. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK29

Contains new jet, float valve and all gaskets and seals you would need to service one carburettor on Rolls-Royce Sliver Shadow/Corniche and Bentley T 1968 on. Please note, however, that the NEEDLE is not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK58

Contains new jets, float valves and all gaskets and seals you would need to service a pair of carburettors on Austin Princess 2200 1974 on, MGB GT V8 with carb refs AUD613LH and AUD613RH and Wolseley Six 1972. Please note, however, that NEEDLES are not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK60

Contains new jets, float valves and all gaskets and seals you would need to service a pair of carburettors on Hillman Imp 1964, Triumph Spitfire Mk I, II, III & IV 1962-73, 1300 TC 1967-68 and 1500 TC 1973. Please note, however, that NEEDLES are not included in this kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK59

Contains new jets, float valves and all gaskets and seals you would need to service a pair of carburettors on Austin Healey 3000 Mk II BN7 BT7 front and centre carbs 1961-62, Sprite Mk II, III & IV 1961-74, Morris Marina 1.8 TC 1971-74 manual and automatic, MG Midget Mk I, II & III 1961-74, Reliant Sabre with Ford Zephyr engine 1963-64, Scimitar 6 cyl 1965-66 centre and rear carbs, Riley Kestrel 1965-66 and Mk II 1968-69, Wolseley 1100 1965-66 and 1300 1968-74. Please note, however, that NEEDLES are not included in this Kit and must be ordered separately. If this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above

Product code: CSK49

Contains new jets, float valves and all gaskets and seals you would need to service a pair of carburettors on MG Midget 1500 1978 on, Triumph Spitfire 1500 1977-80. Please note, however, that NEEDLES are not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: CSK22

Contains new jets, float valves and all gaskets and seals you would need to service a pair of carburettors on Jaguar 240 1967-69 both manual and automatic. Please note, however, that NEEDLES are not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line. For the equivalent Rebuild Kit refer to CRK243

Product code: CSK55

Contains new jets, float valves and all gaskets and seals you would need to service a pair of carburettors on Austin Healey 3000 Mk II BJ7 1962-64, Austin-Morris 1800S 1969-71, MGB Special Tuning with carb refs AUD505F and R, Triumph TR4A with carb refs AUD209F and R 1965-66 and Volvo P1800 1963. Please note, however, that NEEDLES are not included in this Kit and must be ordered separately. If you find that this is not the service kit you need please click on the image below, select the CSK number, and then enter it in the 'part/lucas number search' box above. If you can't find it here please 'phone our Help Line

Product code: 040.168

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for original negative earth cars with negative electric washer switching and pre 1968

Product code: 040.161

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for original negative earth cars without an electric washer function and pre 1968

Product code: 040.169

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for original negative earth cars with positive electric washer switching and pre 1968

Product code: 040.170

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for cars that have been converted from positive to negatuve earth with a negative electric washers function

Product code: 040.171

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for cars that have been converted from positive to negatuve earth with a pegative electric washers function

Product code: 040.172

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for original positive earth cars with a negative electric washers function

Product code: 040.162

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for original positive earth cars without an electric washers function

Product code: 040.173

Smartscreen is a variable intermittent windscreen wiper controller that can set a variable wipe delay of between three and thirty seconds; without the need for additional switches or knobs. By using the vehicle's existing wiper control switch or stalk the unit may be programmed with the desired delay. The normal speed and second speed wiper functions are not affected. Smartscreen is simple to fit and comes with step by step instructions. Normally DIY fitting takes half an hour. Smartscreen is hidden from view so you do not change the appearance of your interior. This Part No. is for original positive earth cars with a positive electric washers function

Product code: 092.P100

A pair of quick fitting diamond pattern chains to give you traction on snow, manufactured using mild steel with spring assisted tensioning system. 9mm projection for limited clearance applications. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.P110

A pair of quick fitting diamond pattern chains to give you traction on snow, manufactured using mild steel with spring assisted tensioning system. 9mm projection for limited clearance applications. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.P120

A pair of quick fitting diamond pattern chains to give you traction on snow, manufactured using mild steel with spring assisted tensioning system. 9mm projection for limited clearance applications. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.P50

A pair of quick fitting diamond pattern chains to give you traction on snow, manufactured using mild steel with spring assisted tensioning system. 9mm projection for limited clearance applications. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.P70

A pair of quick fitting diamond pattern chains to give you traction on snow, manufactured using mild steel with spring assisted tensioning system. 9mm projection for limited clearance applications. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.P80

A pair of quick fitting diamond pattern chains to give you traction on snow, manufactured using mild steel with spring assisted tensioning system. 9mm projection for limited clearance applications. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.P90

A pair of quick fitting diamond pattern chains to give you traction on snow, manufactured using mild steel with spring assisted tensioning system. 9mm projection for limited clearance applications. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.ZU100

A pair of premium quality diamond pattern chains to give you traction on snow and ice, manufactured using hardened manganese nickel steel alloy with reinforced links and automatic tensioning system - avoids having to stop and re-tension chain. 9mm projection for limited clearance applications. Reversible for longer life. Fitted in minutes without moving the car. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.ZU102

A pair of premium quality diamond pattern chains to give you traction on snow and ice, manufactured using hardened manganese nickel steel alloy with reinforced links and automatic tensioning system - avoids having to stop and re-tension chain. 9mm projection for limited clearance applications. Reversible for longer life. Fitted in minutes without moving the car. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.ZU103

A pair of premium quality diamond pattern chains to give you traction on snow and ice, manufactured using hardened manganese nickel steel alloy with reinforced links and automatic tensioning system - avoids having to stop and re-tension chain. 9mm projection for limited clearance applications. Reversible for longer life. Fitted in minutes without moving the car. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.ZU80

A pair of premium quality diamond pattern chains to give you traction on snow and ice, manufactured using hardened manganese nickel steel alloy with reinforced links and automatic tensioning system - avoids having to stop and re-tension chain. 9mm projection for limited clearance applications. Reversible for longer life. Fitted in minutes without moving the car. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.ZU90

A pair of premium quality diamond pattern chains to give you traction on snow and ice, manufactured using hardened manganese nickel steel alloy with reinforced links and automatic tensioning system - avoids having to stop and re-tension chain. 9mm projection for limited clearance applications. Reversible for longer life. Fitted in minutes without moving the car. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.ZU95

A pair of premium quality diamond pattern chains to give you traction on snow and ice, manufactured using hardened manganese nickel steel alloy with reinforced links and automatic tensioning system - avoids having to stop and re-tension chain. 9mm projection for limited clearance applications. Reversible for longer life. Fitted in minutes without moving the car. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 092.ZU97

A pair of premium quality diamond pattern chains to give you traction on snow and ice, manufactured using hardened manganese nickel steel alloy with reinforced links and automatic tensioning system - avoids having to stop and re-tension chain. 9mm projection for limited clearance applications. Reversible for longer life. Fitted in minutes without moving the car. Includes gloves, one pair per pack, repair links and fitting instructions. Available for a large range of wheel/tyre sizes, each size fits particular wheel/tyre sizes, select size from chart below. Enter this number in the search box at top right to obtain full details of that size

Product code: 090.339

Untrimmed Sports Bucket Seat Shell for your own trimmer to complete to your requirements. Handmade seat shell made in steel with a wired edge aorund the backrest to give added strength and provide a finished edge to the material. The rim around the base is carefully folded and spot welded to the backrest, and finally bolted to a plywood base. Also available as a trimmed and finished seat - black is kept in stock, colours available to order. Click on the Technical Drawing link below for a fully dimesioned drawing of the seat shell

Product code: 090.318

A traditional style sports bucket seat that holds the body snugly but comfortably. Base mounted, height 580 mm, length 535 mm and width 380 mm. Trimmed in black leather which is availble from stock. A coloured leather option is also available

Product code: 090.316

A traditional sports bucket seat that holds the body snugly but comfortably. Base mounted, height 580 mm, length 535 mm and width 380 mm. PVC covered, but also available in black leather refer to 090.318. For other colours in PVC refer to 090.317 and other colour leathers refer to 090.319 MADE TO ORDER 3-6 WEEKS

Product code: 090.319

A traditional sports bucket seat that holds the body snugly but comfortably. Base mounted, height 580 mm, length 535 mm and width 380 mm. Leather covered in your choice of colour. Please advise your choice of colour by phoning 01885 488 000 or by e-mail sales@holden.co.uk. Coloured leather seats are made to order and are only started once we have colour approval. As this item is made to order, it is non-returnable. Delivery is typically 4-6 weeks from approval of colour sample

Product code: 090.317

A traditional Seat that holds the body snugly but comfortably. Base mounted, height 580 mm, length 535 mm and width 380 mm. Trimmed in Black Leather which is available from stock. A coloured Leather option is also available please contact us for this option on 01885 488488 MADE TO ORDER 3-6 WEEKS

Product code: 065.902

Axle set of Brake Pads for the two front disc brakes of MGA 1600 and Mk II. These Brake Pads are asbestos free. Original Equipment Part No. was 8G8379

Product code: 040.043

Made from tinted perspex with chrome friction hinges

Product code: 040.042

Made from tinted perspex with chrome friction hinges

Product code: 040.041

Made from tinted perspex with chrome friction hinges

Product code: 020.254

Six terminals, providing Off-On-On function, ideal for use as a lighting or heater fan switch. Can also be used to switch 2 speed wipers if used in conjunctiopn with a relay - See Technical Drawing for more information on this. Can be used on 6 or 12 volts. Requires hole 12mm diameter, panel thickness between the two nuts supplied up to 4.5mm. This a quality switch with a 'Lucas' lever and has the appearance of a Lucas Switch. A range of switches offering different functions is available. Rated at 15 amps on 12 volt systems. This switch can be made to look even more like an original Lucas switch by using the special Bezel or Nut. Use with the special Threaded Washer if replacing original Lucas switches.

Product code: 094.314

Chrome and stainless steel mirror of approximately 150 x 60 mm with an angle bracket for mounting to the top of the windscreen or to a header rail above the windscreen. Supplied with 3 countersunk machine screws for fixing.

Product code: 094.096

Works pattern. Tailor made to fit the boot lid of the TR2/3/3a. Fits to boot hinges at the front and clamps under the lip of the boot at the rear. Brackets, bolts, nuts, washers and gaskets supplied. Chrome plated, but if you want one in stainless steel refer to 094.097

Product code: 094.097

Works pattern. Tailor made to fit the boot lid of the TR2/3/3a. Fits to boot hinges at the front and clamps under the lip of the boot at the rear. Brackets, bolts, nuts, washers and gaskets supplied. Stainless steel, but if you want one chrome plated refer to 094.096

Product code: 065.908

Axle set of Brake Pads for the two front disc brakes of the Triumph TR3 from chassis no TS13046 on (Girling system), TR3A to chassis no. TS56376 (wire wheels) TS56838 (steel wheels)-these cars have 11 in. discs, TR3A from chassis no. TS56834 (steel wheels)-these cars have 10 13/16 in. discs, TR3B TSF series also with 10 13/16 in. discs and TR4 to chassis no. CT4689 (wire wheels) CT4387 (steel wheels)-these cars have 10 13/16 in. discs. These Brake Pads are asbestos free. Original Equipment Part No. was GBP172

Product code: 094.078

Works pattern. Tailor made to fit the boot lid of the Triumph TR4-5. Brackets supplied to fit under boot hinges at the front and behind numberplate at the rear. Bolts, nyloc nuts, washers and rubber washers supplied. Chrome plated, but if you want one in stainless steel refer to 094.079

Product code: 094.079

Works pattern. Tailor made to fit the boot of the Triumph TR4-5. Brackets supplied to fit under boot hinges at the front and behind numberplate at the rear. Bolts, nyloc nuts, washers and rubber washers supplied. Stainless steel, but if you want one chrome plated refer to 094.078

Product code: 094.101

Tailor made in stainless steel to fit to the boot lid of this particular car and designed to be permanently fitted. The platform size is 865mm wide x 530mm deep

Product code: 065.907

Axle set of Brake Pads for the two front disc brakes of Triumph Spitfire Mk IV to chassis no. FH80000 and Spitfire 1500, Herald 1.1/1.3 '61-71, Triumph 1500, 1500 TC '70-76, Dolomite, including Sprint '72-80, Toledo Oct '72-76, Talbot Sunbeam '77-79, Lotus Europa 1.5/1.6/Twin Cam/Special '71-75, Super Seven 1.6 '71-75, Vauxhall Viva HB, HC 1800, 2000, 2300, Vauxhall Firenza 1800, 2000 May '71-73, Vauxhall Victor FD 1600, 2000, VX4/90 with Girling brakes August '67-72, Vauxhall Magnum 1800, 2000 '73-77, Ford Capri Mk 1 and 2 1.3L '69-Sept 1976, Ford Cortina Mk 2 1.3, 1.5, 1.6 Sept '66-70, except GT, Lotus, 1600E. Original Equipment Part No. was GBP574

Product code: 065.909

Axle set of Brake Pads for the two front disc brakes of the Triumph TR3B TCF series with 10 13/16 in. cross drilled discs, TR4 from chassis no. CT4690 (wire wheels) CT4388 (steel wheels) and TR4A-these cars also have 10 13/16 in. cross drilled discs, TR6 1969-72, GT6 1966-72, Vitesse 2.0 1966-71, Sunbeam Tiger 1964-67, Morgan Plus 8 3.5 1966-73, Lotus Elan 1.6 1969-72, Rover P6 2.0 SC 1966-72, Austin 1800 Mk II 1968 on, Wolseley 18/85 1967-69, Vauxhall Firenza 2.3 1973-76, and Ford Cortina E Mk II, Cortina GT MK II and Cortina Lotus Mk II all 1964-70.These Brake Pads are asbestos free. Original Equipment Part No. GBP114/GBP132

Product code: 090.624

Un-mahined boss enabling Bluemels steering wheels to be fitted to cars other than those for which 'off the shelf' bosses are available.. Comprises brass disc suitable for engraving/etching or replacing with logo relating to your car, top plate, cast aluminium boss which will need to be machined to suit the column of your car (taper, spline, keyway or slitting and cross drilling) and four bolts, washers and nuts which clamp the parts together and hold the spokes of the wheel in place.

Product code: 094.322

American style chromed long base mirror, suitable for either wing or door mounting. 110 mm diameter flat glass. The base measures approximately 165x30mm. Base mounted via 2 screws. Supplied complete with rubber gasket and drilling template. Can be used on either side of your vehicle.

Product code: 090.108

Short chrome mirror arm with sprung base. Arm has a vertical height of approximately 100mm from the base to the centre of the mirror fixing hole. Supplied complete with the nut to secure the mirror head. A longer straight arm and a curved arm is also available. A selection of round and rectangular mirror heads is avaialble with either flat or convex glass

Product code: 090.110

Straight mirror arm with sprung base. Arm has a vertical height of approximately 90mm from the base to the centre of the mirror fixing hole, whilst the arm itself is 100mm long. Supplied complete with the nut to secure the mirror head. A curved arm is also available, as is a short version. A selection of both round and rectangular mirror heads is avaialble with either flat or convex glass

Product code: 040.151

Lucas type under dash wiper motor of a type commonly found on Landrover, Morgan, Mini etc. This motor is supplied with a 110' gear already installed, a new wiper rack and a guide ferrule for the rack. Suitable to replace or upgrade an ageing or tired wiper motor. The relevant harness connector is also available, as are a selection of wheelboxes, or if you prefer, a complete kit.